What is the darkest legal tint in California?

It depends on the window. Front side windows have a specific VLT limit under California law, and the windshield has its own rule. We check the current code for your vehicle type before every install and explain your legal options before you book.

How much does window tinting cost?

A 4-door sedan runs $230 to $300 in carbon film or $330 to $450 in ceramic. Larger vehicles cost more because there is simply more glass. The full matrix on this page covers every vehicle type, and every quote is free.

How long does it take for window tint to cure?

Give it 2 to 4 days. The film needs that time to bond fully to the glass. Fresno heat actually helps the curing along, which is one small favor our summers do for tint.

Can I wash my car after getting it tinted?

Wait a few days until the film has cured, then wash normally. On the inside of tinted windows, skip ammonia-based cleaners. They break down film adhesive over time. A damp microfiber does the job.

Is ceramic window tint worth it for Fresno's summer heat?

For a daily driver that sits outside, yes. Ceramic blocks significantly more infrared heat than standard dyed film, which is the heat you feel on your skin. Carbon looks great and costs less, but ceramic is the one people notice on a 105-degree afternoon.

What happens if I roll down my window right after tinting?

The film can peel or shift at the edges before the adhesive sets. That is why we say 2 to 4 days. If an edge does lift, bring it back. We fix our installs.

Call (559) 388-2155 · Mon–Sun 8am–8pm

Serving Fresno · Clovis · Madera · Selma · Reedley · Hanford

CALL

BOOK ONLINE

Home > CERAMIC COATING

CERAMIC COATING in Fresno, CA

P&S STOUT and Classic coatings, applied after a full paint inspection. Fresno sun, dust, and hard water are exactly what ceramic coating was made for. Your paint works hard here. Coat it like it.

BOOK ONLINE

Call (559) 388-2155

Takes about a minute · Same-week slots go first

Since 2015

11 years in Fresno

4.9 / 210

Google reviews

Mobile-first

Vans carry own water + power

Prices published

Details from $179

CERAMIC COATING IN FRESNO: PROTECTION LEVELS

Every coating starts with a free paint inspection. We measure, we look closely, and we tell you what your paint actually needs before recommending a tier. Warranty terms come in writing before you pay.

3-YEAR COATING

1-year warranty

BOOK ONLINE

5-YEAR COATING

5-year warranty

BOOK ONLINE

8-YEAR COATING

8-year warranty

BOOK ONLINE

What every tier includes: full decontamination wash, iron and tar removal, and panel-by-panel coating application. The difference between tiers is durability and warranty length, not prep quality. Prep is non-negotiable at every level.

What CERAMIC COATING does

Hydrophobic surface. Water beads and sheets off instead of sitting and spotting. In a hard-water town like Fresno, this alone is worth real money.

UV resistance that slows oxidation and fading. Valley sun is paint's worst enemy after neglect.

Gloss enhancement. That deep, wet look that makes a three-year-old car read as new.

SiO2 chemistry. Ceramic coatings bond silicon dioxide to your clear coat at a molecular level. That is why they outlast wax by years instead of weeks.

Easier maintenance washes for years. Dirt releases instead of bonding, so your regular coating maintenance wash takes half the effort.

Chemical resistance against bird droppings, bug splatter, and road grime. They still need washing off, but they come off easier and damage less.

What IT does NOT DO

Honesty first. Ceramic coating is not rock-chip armor. It will not stop a shopping cart or a gravel strike. It resists light swirls and adds real hardness, but deep scratches get through. Anyone promising otherwise is selling, not coating.

PAINT CORRECTION FIRST?

Coating locks in whatever is underneath it. Because it seals in swirls, oxidation, and water spots along with the gloss, including defects that keep spreading quietly under the surface, we inspect every panel and correct what needs it before a single drop of coating goes on. Skipping this step is the most common regret we see. Our paint correction in Fresno is the proper prep, and we will tell you straight whether your paint needs it.

OUR PROCESS

Free inspection. We measure paint depth and map every defect.

Decontamination: foam, hand wash, iron remover, tar remover, clay treatment.

Correction if needed. One-step or two-step, decided at inspection.

Panel wipe and coating application, one panel at a time, in controlled conditions.

Curing and final inspection. You get the aftercare sheet: about 7 days before the first wash, pH-neutral soap after that, never an automatic tunnel wash.

Proof of work

See the Transformation

BEFORE AFTER

Interior detail: before and after.

WHY BOOK WITH US

Published prices

Free paint inspection with honest scope. If your paint does not need correction, we say so.

Named products

P&S STOUT and Classic. Named products, not mystery bottles.

We come to you

We coat at our Fresno shop where conditions are controlled. Some jobs should not be rushed in a driveway, and we will tell you which.

Proven in Fresno

Warranty in writing. Not a handshake, a document. Since 2015. Coating is chemistry plus patience, and we have both.

Reviews

What Fresno Drivers Say

Where We Go

Service Areas

We run mobile routes across Fresno, Clovis, Madera, Selma, Reedley, and Hanford, and all of the Central Valley.

Travel beyond 15 miles from our Fresno shop adds a flat $30 trip fee.

Fresno

Clovis

Madera

Selma

Reedley

Hanford

Outside these six cities? We cover all of the Central Valley. Call (559) 388-2155 for a trip quote.

ceramic coating FAQ

How much does ceramic coating cost in Fresno?

It depends on your paint's condition and the protection level you choose, because correction work comes first when the paint needs it. Every coating starts with a free inspection and a written quote. No guesswork, no pressure.

How long does ceramic coating last in California heat?

It depends on the tier, how the car is stored, and how it is washed. A garaged car washed properly will always outlast a daily driver baked in open sun. We put the expected durability for your chosen tier in writing before you pay.

Is ceramic coating worth it in Fresno's Central Valley sun?

This is one of the best climates in California for coating to earn its keep. UV is the main killer of clear coat here, and ceramic's UV resistance plus hydrophobic behavior directly answer Fresno's two biggest paint problems: sun and hard water spots.

Does ceramic coating prevent scratches and swirl marks?

It resists light swirls and adds measurable hardness, but it is not scratch-proof. Rock chips and deep scratches will still get through. What it does brilliantly is keep properly maintained paint looking new far longer than wax or sealant ever could.

Do I need paint correction before ceramic coating?

If your paint has swirls, oxidation, or water spots, yes. Coating seals in whatever is underneath, good or bad. We inspect first and only correct what needs it. Skipping correction to save money is the one shortcut we will talk you out of.

How long do I have to wait before washing my car after ceramic coating?

About 7 days for a full cure. After that, pH-neutral soap and the two-bucket method. Never an automatic tunnel wash. We walk you through the whole routine at pickup so the coating lives its full life.